Product · pyrolysis stream Pre-orders open

TKP-PYR-OIL pyrolysis oil

The fuel that replaces diesel in your industrial kilns, boilers, burners and dryers. Produced in Kinshasa, with no import freight embedded.

Gap versus diesel
−15% to −23%
per litre on your thermal fuel line, versus diesel.
Gap ex-works Kinshasa plant, against your current purchase reference. Cost delivered to customer established by quote.

This gap is read per litre. The oil’s calorific value, estimated between 35 and 42 MJ/kg, is lower than that of diesel: the real advantage per megajoule is smaller than the advantage per litre. We write it here because your own calculation will show it.

Pyrolysis unit: condensers and oil draw-off into a drum
Heat turning non-recyclable plastic into fuel. Illustration — not a contractual visual.
What the product is, and what it is not

TKP-PYR-OIL pyrolysis oil is an industrial fuel intended for direct heat: kilns, boilers, burners, dryers. It is not an approved motor fuel. As it stands it complies neither with EN 590, which defines road diesel, nor with ISO 8217, which defines marine fuels. Its use in a vehicle engine is excluded.

Gensets — contact us, from Year 2. Use in a genset is possible in a blend, never neat, after a compatibility trial run or validated by the engine manufacturer, and with reinforced filtration. We do not offer it at start-up and we issue no warranty on an engine.

Food-industry cooking — two cumulative conditions. Combustion in a separate firebox, with no contact between flue gases and the food product, and a batch certificate of analysis establishing chlorine, sulphur and ash content. Failing both conditions, the use is not recommended.

Trial By reservation Planned at start-up

200 L test on your equipment — free, by reservation

Reserve your combustion test on your kilns, boilers, burners or dryers. The safety data sheet is provided with the test. Reply within 48 business hours. Tests are scheduled at plant start-up; priority to letter-of-intent signatories.

Tests are not offered on vehicle engines or gensets. For an installation in contact with a food product, two prior conditions apply — see “What the product is, and what it is not”.

Order terms

Reference
Packaging
Status
TKP-PYR-OIL
200 L drum
Planned at start-up
FCA Kinshasa plant — loading of your vehicle is carried out by TakaPlast. Minimum order: 1 drum. Single catalogue price whatever the packaging, bulk included.
Full price grid, product sheet, technical sheet and safety data sheet provided within 48 business hours, on request and without commitment. Request the price grid
Start-up: 8 months from construction launch. The confirmed schedule is communicated to letter-of-intent signatories as soon as works begin.

Incoterm and payment terms are contractual terms, settled in the general terms of sale.

Status of the published characteristics

The plant is under construction. To date, no production has taken place and no laboratory analysis has been carried out on a TakaPlast product. The characteristics shown on this page are design values: they constitute neither a warranty nor a contractual specification.

The enforceable characteristic of a batch is the one recorded on its certificate of analysis, issued per batch from first production onwards. No delivery takes place without the certificate of analysis for the corresponding batch.

Production at M8, first deliveries at M9, in months elapsed since financing close.

Specifications (technical sheet)
ReferenceTKP-PYR-OIL
Usedirect heat — kilns, boilers, burners, dryers
Inputsnon-mechanically-recyclable plastics
Quality controlper-batch analysis (TS v2.0)
DocumentsSDS + certificate of analysis
Safety data sheet (SDS) provided with every delivery.
Packaging & documents
200 L drums
FCA Kinshasa plant, loading included · Kinshasa delivery optional
Certificate of analysis per batch, on request
Pyrolysis gas: self-consumed on site, it heats the reactors and the thermal uses of the four lines. It is not in the catalogue — no reference, no price, no committable volume. A neighbouring industrial user may position itself through an agreement in principle, without volume or price, whose conversion into a contract is conditional on the site’s heat balance.

Request an oil quote

Reply within 48 business hours, with the product sheet and the technical sheet for the stream concerned.